Gemstar Custom Razor #92 For Sale !!!! Maker: WC Corsan Model: n/a Origin: Sheffield, England Steel: Carbon, Cast Steel Size: 6/8 + Grind: Near Wedge Point: Olde English Slanted Square Scales: Custom Camel Bone Wedge: Green Malachite Pins: Solid Brass Washers: Outer = True old style beehive Brass - Inner = Solid Brass Honing: Naniwa Chosera 1-5-10 Select grade Coticule Finisher There was barely any visible hone wear on this Old English Gal and after a light polishing there is none at all...I only did a light polishing and buffing to the steel, and brought it to a near mirror finish, many would call this a Mirror I do not The scales are Custom Camel Bone and are a thin .105" thick much like the Old Bone scales were during this time period.. They polished out just beautifully and were polished twice more using Renaissance wax to seal them well.. The outer washer were made by a friend of mine and the the closest I have ever seen to the original style used on Sheffield razor back in the day down to the under cap washers to prevent the outer from collapsing.. The wedge is at .063" at the very end made from Recon Green Malachite.. The razor centers perfectly, and is a near wedge grind made from Sheffield Cast Steel.. If you like Heavy English steel this is one you really want.. Measured at 6/8 inch at the smaller side slightly higher at the tall side... Something to ask me about is the Elk Antler Brush that has a Green Malachite base that will match wonderfully with this Razor.. The pics are not up because I am waiting for the 20mm Super Silvertip knot to get here There is a deal to be had if you want both... Prices and Contact Info is here on my website For Sale - Gem Star Customs
Gemstar Custom Razor #93 Maker: F. Accadi Model: Alba Dawn Origin: Solingen, Germany sold from Brooklyn NY Steel: Carbon Size: 5/8 + Grind: Double Hollow Grind Point: Square Scales: Custom Bumblebee G10 Wedge: Yellow Acrylic Pins: Solid Brass Washers: Outer = Solid Brass - Inner = Solid Brass Honing: Naniwa Chosera 1-5-10 Zulu Grey finisher There was barely any visible hone wear on this one and after a light polishing there is none at all...I only did a light polishing and buffing to the steel, and brought it to near perfect Satin finish.. The scales are Custom Yellow & Black G10 that have been contoured to bring out the Bumblebee effect and are a thin .115" beautifully contoured much like the Vintage scales to fit the hand while shaving and stropping. The wedge is at .055" at the very end made from a Translucent Yellow acrylic to match the scales, and continue the Bumblebee effect.. The razor centers perfectly, and the double hollow grind delivers a smooth comfortable shave...
Gemstar DFS Razor #214 (damn fine shaver series) Maker: AJ Jordan Model: n/a Origin: Sheffield, England Steel: Carbon Size: 5/8 Grind: Double Hollow Grind Point: Spike point Scales: Ebony Honing: Naniwa Chosera 1-5-10 Select Grade Coticule finisher The razor is near perfect with no visible hone wear, very light polishing after unpinning leaves a nice Satin finish .. The Original Celluloid were trashed and I had this set of Black Ebony on the bench, they fit the razor like a glove so I pinned them up and she centers and moves perfectly ...The razor is honed and it is stropped to true shave ready for you... Price and Contact info is available on the website here For Sale - Gem Star Customs
Gemstar DFS Razor #215 Added to the website on 5/12/15 Maker: Boker Model: Barber's Special Origin: Solingen Germany Steel: Carbon Size: 5/8 Grind: Double Hollow Grind Point: Square point Scales: Celluloid Honing: Chosera 1-5-10, Blue/Green Escher Finish The razor is near perfect with no visible hone wear, very light polishing after unpinning leaves a nice Satin finish .. The Celluloid scales are near perfect also... The razor is honed and it is stropped to true shave ready for you... Gemstar Custom Razor #95 Added to the website 5/12/15 Maker: Frederick's Model: Celebrated Origin: Sheffield, England Steel: Carbon, Size: 11/16 Grind: Hollow Point: Round Scales: Custom Translucent Buffalo horn Wedge: Turquoise Pins: Solid Brass Washers: Outer = Triple Stacked Beehive - Inner = Solid Brass Honing: Naniwa Chosera 1-5-10 Select grade Coticule Finisher Just a really sweet shaver, nice smile, scales where built for this razor,, A very comfortable shaver made of Sheffield Steel.. Don't miss out if you are interested in trying English steel at a good price Thanks for looking
Posted 6/17/2015 Gemstar DFS Razor #216 Maker: Dubl Duck Model: Goldedge Origin: Solingen Germany Steel: Carbon Size: 5/8 Grind: Double Hollow Grind Point: Round point Scales: Cracked Ice Celluloid Honing: Chosera 1-5-10, Blue/Green Escher Finish Price: SOLD !!!! The razor is near perfect with no visible hone wear, very light polishing after unpinning leaves a nice Satin finish .. The Celluloid scales are near perfect also... The razor is honed and it is stropped to true shave ready for you... The only reason this razor is $99 and not $100's is that the Original Square point was broken of and I re-fashioned the point the edge is about 1/8 of 1 inch shorter... If I didn't tell you this I doubt many would even notice it ...
Posted 6/17/2015 Gemstar DFS Razor #217 Maker: Kinfolks (A Case Bros. company) Model: Wedge Origin: Little Valley NY Steel: Carbon Size: 5/8 Grind: Wedge Point: Square point Scales: Original Celluloid w/logo intact Honing: Chosera 1-5-10, Zulu Grey finisher Price $109 The razor is near perfect with no visible hone wear, very light polishing on the faces leaves a nice Satin finish .. The Celluloid scales are near perfect also, and the original pinning is intact.. The razor is honed and it is stropped to true shave ready for you..
Yeah that was a heck of a deal, it went bye bye before I even finished getting it listed in all the places..
Just some updates for you on what is going on up here this Fall in Idaho I have changed to making Custom Brushes by special order only, Matching Sets in Woods and Antlers even Acrylics are available .. Like this Birdseye Maple set I love doing the Antler brushes like this Elk Whitetail Or a Triple Matched set like this in Acrylic I actually use a Vacuum Chamber to treat all the Wood Brushes so the finish is throughout the wood instead of just on the surface.. I have decided to go ahead and do Re-Grinds on a limited basis, Obviously they have to be an older heavy grind to even be considered.. You can e-mail me the pics and questions at (gssixgun@gemstarcustoms.com) Stuff like these old Turner's that were honed to death, Can be brought back to life again and have many generations of shaving left in them.. Restores and Honing are the same as they have been for the last 8+ years, just touch base with me at the e-mail above or through the website Welcome GemStar Customs - Gem Star Customs I also have a Facebook Page under Gemstar Customs if you are a Facebooker, please like it, and join me there too I often post the For Sale Razors and the DFS (Damn Fine Shaver) series on there so check it out Do you have Heirloom Razors or perhaps stuff so Valuable and Delicate that you are almost scared to have anyone touch them ??? I have been specializing in those for longer then anyone else, send me an e-mail and we can talk about the risks -vs- the reward of using them again.. Just catching everyone up on what is going on at GemStar Customs
It is rather rare that I actually have razors for sale but these came in from a trade and if you are looking for some good steel at a fair price you might want to check them out http://www.gemstarcustoms.com/index.php/for-sale.html Thanks
For those who may not know Glen, I'll vouch for his work. He's the only one that works on all my str8s. Not only great work, but a great guy to work with.
Gemstar Custom Razor #95 Maker: John C. Cockhill Model: The Celebrated Origin: Sheffield England Steel: Carbon Size: 6/8 Grind: Heavy Near Wedge Point: Slanted Square Point Scales: Custom Honey Horn Wedge: Green Malachite Pins: Solid Brass Washers: Outer = Brass Domed - Inner = Solid Brass Honing: Chosera 1-5-10k Coticule Finisher No hone wear on this one, did a light polishing and brought out a near perfect High Gloss Satin finish on the heavy Sheffield steel..The scales are Custom Honey Horn with beautiful subtle streaking and a high gloss finish.. John C Cockhill was known as a higher end supplier of Gentelmen's Accutrements, this is a top line Sheffield razor. The razor is of course shave ready and delivers a silky smooth shave from combing the Sheffield and the Coticule finish
Gemstar DFS Razor #225 Maker: Carl Monhouse (C-MON) Model: Star Origin: Solingen Germany Steel: Carbon Size: 11/16 Grind: Full Hollow Point: Round Nose Scales: Swirl Plastics Honing: Chosera 1-5-10 Blue Green Escher finish The razor is in great shape with no visible hone wear, polishing on the faces leaves a nice Satin finish, Carl Monkhouse is the man behind the famous C-MON brand, his razors are sought after as being some of the smoothest shavers out there.. I have had the scales sitting on the bench for years and they fit this razor like a glove so I used them, I am sorry I just can't remember where they came from The razor is honed and it is stropped to true shave ready for you... Info and Prices are found here http://www.gemstarcustoms.com/index.php/for-sale.html
I know it is rare but I traded some razors for some Restore and Honing work Just a sweet 5/8 Henckels Zwillingswerk #78 Clean no visible hone wear what you see is what you get. Still, has Etch on the front of the blade face has NOT been restored. Honed & Stropped to a true shave ready condition Chosera 1-5-10 waiting for your requested Finisher $65 Shipped CONUS Paypal is preferred payment, but we can talk PM here or email gssixgun@gemstarcustoms.com Next KB Extra #26 NotchNose These are not well known, but those that have them know how sweet they shave Kursius Brothers - KB Extra #26 it is a 5/8+ No visible hone wear, clean bright steel, what you see is what you get it has NOT been restored it is that clean Honed and Stropped to a true Shave ready Chosera 1-5-10 awaiting your request for a finisher $75 Shipped CONUS Paypal is preferred but we can talk PM here or email gssixgun@gemstarcustoms.com Thanks for looking