April 2017 30 Day Rule/Focus Pix & Discussion

Sunday, April 23, 2017

Simpson Chubby 2 Synthetic
Fine Platinum
Wolfman WR1-OC w Darwin Titanium
Gillette Silver Blue
Fine Platinum Aftershave
Creed Aventus

​

 

Nice looking set up! What's the ghost town barber like? I love the name!

 

Thanks. The cheeks I am pretty good. The neck and chin are still both challenges. This is a slow learning process and I think I am going to give it another 30 days as well. I won't use it every day, but I hope my comfort and skill level will be adequate by the end of May.

 

Day 28 of 30 days of Henckel straights

2 passes again today, this time with the 4/8 Henckel. Results were the same as yesterday, very nice.

Virtually the same as what I wrote yesterday and the day before that, only today this is the 4/8. I have gotten to the point where I can get a 2 pass DFS with any of the 3 blades . I haven't felt the need lately to go for a third pass and try for a BBS. But, I also have been steadily reducing the number of cuts I get - only 1 nick in the last 4 days.


DIY Pre-Shave Oil
ABC with TOBS Rose Face Lathered
2+ pass, WTG, XTG
24MM silvertip set an extra 10mm deep
Sampsons All Natural Aftershave Balm
Round Toe 4/8 Henckel 89 1/2

 

QUALIFICATIONS FOR RUNNING @wristwatch fan club:

dealing ice cream

 

Olive oil
Grape jelly
KY jelly
Suntan lotion
Ketchup
Agave
Guacamole (or just blended avocado)
Irish cream
Banana pudding
WD40
Gelato


Sent from my XT1585 using Tapatalk

 

WD40. That's one that hadn't crossed my mind. And....it could help with older razors too. LOL

 

Just witch hazel. A microfiber cloth. So there is a Norwex microfiber that my sister and sister in law use. Just water and rub the cloth on their skin and shave. No soap or anything. And it works for them. Some guys do it too.

Sent from my Nexus 5X using Tapatalk

 

It's fantastic! It's a barbershop scent but instead of powder it has leather and gunpowder. I love it, top 3 scents and excellent performance. The AS lasts 12+ hours as a bonus

 

I've always had my eye on that one. Might try to squeeze it in as part of my "End Of 2017 Blitz" to avoid buying it in 2018. I'm pledging a NB2018.

 

That was my immediate thought. Ranch, not Bleu. Man's gotta know his limits.
How's about Russian Dressing and a Voskhod?
Borscht, caviar, shashlik drippings, golubsty, olivie, I could go on...

 

Beautiful Mark. Is that the standard or increased gap OC?

 

23 April 2017 Blade/Soap Focus Shave

Pre: Plenty of hot water, VDH Shave Butter w/hot towel and some bloom water from the soap.
Razor: Gillette 1952 Super Speed Black Tip
Blade: Gillette Silver Blue
Brush: JR #161 NY Mets Special Edition
Soap: Catie's Bubbles "Tonsorial Parlour"
Post: Hot/Cold rinse, cold towelx2, alum block, Dominello Vitali Calming Post Shave Moisturizer
After Shave: Canoe by Dana

Today's shave kicks off the blade auditions for the '52 Super Speed Black Tip. First up is my baseline the Gillette Silver Blue.
As usual GSB came thru with a great 3 pass DFS+ shave. The SS is a sweet shaving razor. After a week of the VDH razor today was heaven.
JR#161 produced a fine slick cushiony lather from the Catie's Bubbles. I finally am dialed in with this soap. Splashed on some Canoe and my Sunday was off to a great start.
Have a great day.

 

Any of you gun nuts have access to ammo big enough to cut open the casing and use it as a brush handle to sink/epoxy a 24 mm knot in? I'm pretty sure it needs to be bigger than a 50 Cal, which puts it well above my pay grade and classification level. It may not be possible, but the idea has me intrigued.

 

great brush

 

Thanks. Jim did a fantastic job on it.

 

Grits

 

Kudos on the big bottle. Love me some Canoe.

See; Lava soap?

 

Yesterday=Lava.......Today=Block.

 

A .50 cal is 12.7mm or roughly half the size you need. I used to have an expended shell from a Ww2 20mm Oerliken AA gun which would be close. Maybe one from the 25mm Bushmaster cannon on a Bradley AFV? I think the problem would be that in these larger sizes, the size of casing needed to hold the propellant will make the whole thing much too long to be a good brush. Actually, the 20mm Oerlikan shell casing would have been about right, because the body of the casing was closer to 25 - 30mm in diameter so if you cut the top off you would have a decent handle length of the right width.