Interesting. Thank you. Next time I'm at Woodcraft I'll have to see if they have any or know anything about it.
Thanks for this. Is you are always holding from the bottom, are you using a medallion or another plug method to cover it up?
Something a little different, and frankly not a lot of turning in it. I made a razor stand, with turned posts and buttons on top. It is an illusion, they are not one piece.wood is Ebony and Australian Ironwood. Pic is before the polymerized Tung Oil finish. Had a little glue seepage on the left post.p to tidy up: The ebony darkened up nicely with finish. I thought the Ironwood would match the display rack nicely. I am pleased with how it turned out:
Might I recommend a Beall expanding collett chuck? Inexpensive and holds the top nicely while you finish the bottom on the lathe.
W.O.W......just.simply.awesome. Great craftsmanship on everything, and incredible collection display Jason!
Not a lot. Very size specific. The 1 inch will expand to hold a one inch hole tightly, etc. I have the 1 inch and the 1 1/8 inch. I’ve leaned to using 24 or 28mm knot often as a result.
Not a brush but I turned this Mach 3 handle for my dad for Christmas. I cast the blank which is a cherry burl hybrid.
Thank you Thank you. I recently switched to using a finishing paste and it has certainly helped improve my finish process.
Think buffing compound. What I use is called Yorkshire Grit. It comes in two grits. Some just use the coarser but I use both before and after a CA finish. I don't wet sand anything anymore.
Very cool. I've considered trying something like that. Kim Tippin on YouTube has a video on how to make your own. She says it works great and costs MUCH less than store bought products. When using it before CA finish does it leave a residue that needs to be cleaned off before CA is applied? If so what is your method?
There typically is a little residual paste left but I just wipe what ever I am turning down good with a paper towel before I apply my CA. The stuff I got is a little pricey but for how little you use at a time it will last a really long time so it is a little easier to justify the cost. I just took a look at Kim's video. I may have to give that a try once the stuff I have now is gone or maybe try a small batch for my son to use so he stays out of mine haha. I have dabbled with so much DIY and low cost stuff in my shop over the years. Sometimes after it all I wonder if my time would have been much better spent just buying what is available and making chips with the time and headache saved.
I get that. Sometimes I wish I wasn't handy enough to fix some stuff around the house. Some of the projects end up being a major pain. Partly because I have tools that with effort can get the job done but are not ideal for the job. Partly because I'm learning as I go, which often means making and correcting mistakes. And partly because our house is 120 years old and has never been fully renovated so there are lots of Odd problems to overcome. Many times I believe it would be much easier to build a house from the ground up than to completely renovate this one.
I find myself nodding along to this...our house is 114 years old and I have tried to do most everything myself as well.