1. @Steve56 Irony we were just talking about these older Sheffield razors that it seems the Heels were never brought into play until now..

    Marches & Sheperd Pond Works one of those oddities with a Slantnose

    The MM test showed it all..

    Before:

    [​IMG]

    [​IMG]

    After:

    [​IMG]

    [​IMG]

    Nothing special needed, just "Honing Gymnastics" and a Chosera/Pro 1k

    Hone On !!!

    [​IMG]
  2. Ha ha, nice work Glenn, that’s what I’ve been doing to the Tourons.
    Karl G and gssixgun like this.
  3. Just finished honing ‘Jeudi’, it made up for that PITA ‘Mercredi’. Even the heel wasn’t bad
    Karl G and gssixgun like this.
  4. Re-Contouring the bevel and heel on this old Wosty

    [​IMG]

    [​IMG]

    Was working with a well worn DMT 325 but I think it is time to take it to the shop and get serious about this hehehehe
    Frijolero, Karl G, TestDepth and 2 others like this.
  5. Yepper, I think that one needs some shop love.
    Karl G and gssixgun like this.
  6. Cleaned, Polished, and Honed @Axeman556

    Since we were talking about the Zulu's the other day, and this "GreenLizard" was on the hones today, I decided to use mine for the finish after the Chosera/Pro line up 1/5/10k

    These razors are incredible shavers out of Little Valley NY

    [​IMG]

    [​IMG]

    [​IMG]

    Hone On !!!
  7. Woohoo , nice work my friend thank you !!!
    Karl G and gssixgun like this.
  8. It's now a looker. Well done.
  9. Yep, those are some good razors.
    Karl G likes this.
  10. Catching up, hope you all made good use of the Memorial Day weekend, we spent it on the lake..

    Yesterday on the hones..

    Chosera -1-5-10 ladder progression into a few different finishers

    Coticule
    Escher
    9-Ball Slate

    [​IMG]

    [​IMG]

    [​IMG]


    "Lil Huntress": Remi making sure the Swallows that tried to make a nest under the corner of the Bimini know she is not having it at all...

    [​IMG]

    [​IMG]


    Hone On !!!
  11. Nice looking work there Glenn!
    gssixgun and Karl G like this.
  12. Thiers-Issard
    Made in France
    15/16th
    Half Hollow

    This one is @lindyhopper66 's razor. I didn't like the look of the very large bevel on it, so I used 2 layers of tape, to decrease the bevel more than half. Just for fun, took the bevel down to the 1k and worked my way up the Welsh Slate Stones, using a few Naguras acquired by @Steve56 , a long while back. I then topped it off with an Arkansas Surgical Black stone. It took a keen edge, that easily passed the HHT with the root in and root out, on some very fine hair.


    P6090098.JPG
    Frijolero, Karl G, Steve56 and 2 others like this.
  13. J.A.Henkels
    "Friodur Inox No Stain" (Stainless)
    Solingen Germany
    15/16th
    Full Hollow

    Second one of @lindyhopper66 's blades. It too was taken down to ground zero, with the bevel. Only one layer of tape was needed. I used a one stone hone(kind of) with a Nakayama and Naguras, acquired from @Steve56 , a long while back. I finished on an Eschers Thuringian, under running water. Excellent results, and an easy progression. Easily passed the Root in and out HHT. It was a pleasure to shave with this morning.

    P6090099.JPG
    Frijolero, Karl G, Steve56 and 2 others like this.
  14. Thank you. Thank you. You are truly a master honemeister.
  15. Thank you.
    Karl G, TestDepth and DaltonGang like this.
  16. I don't know about that, but thanks. I hope they work well for you. :eatdrink047:
  17. Suzumasa
    13/16th
    1/2 Hollow

    This one only needed a touch-up, on an Eschers Thuringian stone. It feels pretty good, after 30 laps on the stone, and a little time with the strop. It now easily pops the finest of hairs, root in or out.

    P7090102.JPG
  18. Bartmann 504 6/8

    It has been so long since I've had to hone any of my straights that I lost trust in my abilities to reset a bevel and get a straight shaving well. @DaltonGang honed my TI after I tried different methods and stones. Someone reminded me in all this is if you get the bevel where it will shave hair, all the rest is easy. I had to do double the amount of circles on the 1K Naniwa to get a good bevel, but after that with the 5K, 8K, 12K and 20K Gokumyo I got a very smooth and sharp edge and had a great 2 pass shave with it today.

    DSCF2170.jpeg
  19. NICE, those old Thuri's do a great job. I need to shelve my JNATs and play with my Escher more. Cheers!
    DaltonGang and lindyhopper66 like this.
  20. Beautiful razor, as are most of yours. Congrats on getting the hang of honing again. :eatdrink047:

    .
    Steve56 and lindyhopper66 like this.