Forums Register login New Posts
Schick Repeating Razor Owners Club (SRROC)
Page 42 of 80
  1. Hodge
    Had such a great shave with the type B, I figured I'd stay with the Repeaters for tomorrow...
    [​IMG]
    twhite, Norcalnewb, Redfisher and 3 others like this.
  2. Herm2502
    Uh.. What he said applies to me, too.
    Redfisher and Karl G like this.
  3. DDuckyMark
    If you have a small screw Allen wrench that will fit in the back where the spine of the blade sits that might help tighten it up. Stick that in there then firmly press the head down on a hard surface and rock it towards the comb to close it up some. When you pull the Allen wrench it should hold the blade more firmly.
    twhite, Redfisher, Hodge and 3 others like this.
  4. Billyfergie
    :happy102:.....They can be springy I know...You have to make sure its pressed down more towards the side/angle where the blade will be exposed ..If you cant get it to tighten You could use a thin shim on the top side of the blade to take up the gap...I have never done this but it should do the job...:)

    Billy..:chores016:
    Redfisher, Rufus T., Hodge and 1 other person like this.
  5. Hodge
    Yeah, I was thinking I might try shimming it. Thanks for chiming In Billy.
    Redfisher and Billyfergie like this.
  6. Hodge
    Just read your suggestion and think this will do it. Thanks
    Redfisher and Billyfergie like this.
  7. Redfisher
    Bunny has a trick for that something about using a drill bit.
    Hodge, Billyfergie and Karl G like this.
  8. Redfisher
    Classy setup Roger!
    Hodge, Billyfergie and Karl G like this.
  9. twhite
    Have you fixed this yet? If not let me know. I can help you fix it. I will post how.
    Karl G, Redfisher and Billyfergie like this.
  10. twhite
    Here is what i do. I get a small drill bit just large enough to open the spring slightly the drill goes to the back of the spring. Then slide a small allen wrench in to open the blade slightly more. Then gently massage the front of the blade to bend it down slightly.
    Karl G, Hodge, Redfisher and 1 other person like this.
  11. Hodge
    Thanks it was a great shave this morning. All 3 type repeaters are impressive shavers.
    Redfisher, Karl G and Billyfergie like this.
  12. twhite
    I just received Bunny Kelman's C1 (C222) It is in need of some cleaning. It cycles blades fine. This looks to be a well used razor. But everything functions fine. I will be cleaning this up today. It will get its first test run tomorrow as I shaved last night with my PAL injecto-matic, and I will not have enough stubble to try Bunny out properly. So that will be my Sunday morning shave.

    Bunny
    [​IMG]
    my family photo from left to right B1,B2,C1 (Bunny's) & C2.
    [​IMG]
    Hodge, mrchick, Norcalnewb and 5 others like this.
  13. twhite
    Have Bunny all cleaned up. HE turned out better than I expected. A good scrubbing with Scrubbing Bubbles pipe cleaners and a toothbrush.
    I got a bunch of gunk out. I will be using this tomorrow.

    Bunny
    [​IMG] [​IMG] [​IMG]
    Herm2502, Hodge, Billyfergie and 6 others like this.
  14. Redfisher
    That cleaned up great Tom!:signs107:
    Billyfergie and Karl G like this.
  15. mrchick
    SHE's beautiful!
    Karl G, Billyfergie, clint64 and 1 other person like this.
  16. twhite
    HE !he's a HE
    Karl G and Billyfergie like this.
  17. mrchick
    The worlds first transgender razor
    Herm2502, Hodge, Karl G and 2 others like this.
  18. twhite
    HAHAHAHA I am crying right now. TOO funny
    Karl G, Billyfergie and mrchick like this.
  19. Billyfergie
    :happy097:

    Billy..:chores016:
    mrchick and twhite like this.
  20. Darkbulb
    It's a transitional razor
    mrchick, Billyfergie and twhite like this.
(You have insufficient privileges to reply here.)
Page 42 of 80