Injector & SE Party !!!

Discussion in 'Safety Razors' started by Bird Lives, Apr 28, 2011.

Thread Status:
Not open for further replies.
  1. Herm2502

    Herm2502 off to elf practice

    Still shaving with the Schick Adjustable. And, since I only have two soaps there is little variation in my setup. Until today I've been trying to get away with two passes (XTG, ATG). I've been using the razor on 5 and, while it is a comfortable shave, it has only been what I'll call a CCS. There has still been a tiny bit of stubble to be felt if I run my hand against the grain. Today I upped the setting to 6 and went with three passes (XTG, XTG, ATG). The results were better, probably a weak DFS. Maybe I'm just uncoordinated.
     
    AGHisBBS, Rufus T., wmbjr and 3 others like this.
  2. Darkbulb

    Darkbulb Cookie Hoarder

    Scored a bit of a personal 'injector white whale' today - a NIB/NOS Gillette Twinjector.
    As far as I know it's the only injector razor Gillette ever made and it's been a pain trying to find one....

    This one will cause me some serious headache trying to decide on to keep it in the box...or open it up and use it....

    [​IMG]
     
    Jayaruh, AGHisBBS, Rufus T. and 8 others like this.
  3. Karl G

    Karl G Well-Known Member

    What good is it to you keeping it in the box - at least for more than a few days to admire and take photos of? Unless you scored a super bargain and plan to resell it for $$ then open it. My $.02 anyhow. :cool:
     
    Last edited: Feb 3, 2016
    AGHisBBS, Rufus T., Hodge and 3 others like this.
  4. Karl G

    Karl G Well-Known Member

    The G1 shave from Hell. That's what I got today. :angry021:

    I tried out a G1 I've had sitting around for months - but never used. It originally had a bit of a loose spring and I was able to tighten it back up with a needle nose pliers and some forward torque applied to the base of the spring. I decided it was time to test it out as I plan to run through the G series over the coming week or two. Very rough first pass, lots of stubble left. Very rough second pass, still a good bit of stubble. I considered replacing the Schick blade with a Personna as I find them to be far superior in the G but I carried on. On the third pass I decided to alternate with a G1 I have that's always been solid. It seemed somewhat smoother so I was thinking maybe the repair had something to do with the poor performance of the repaired one. And then it happened. The more solid G1 took a nasty slice off my face near the goatee area. Crapola - a small divit. Time will tell if it will fill in. Grrrr. :angry019: So, the supposedly "good" one did real damage and the repaired one just gave a mediocre shave. I blame the blades (yeah, and probably moving a bit fast) but I'm in no hurry to return to either razor to test that theory out. However, I will be ejecting the Schick in my G2 and replacing it with a Personna for the next shave in the series.

    T&H Ultimate Comfort PSO
    Bio Palmyra Shave Cream
    Savile Row 3824
    Schick G1
    Schick (1)
    Osma Alum block
    T&H Classic After Shave Balm

    G with kit.JPG

    Happy shaving - Karl
     
    preidy, Jayaruh, AGHisBBS and 6 others like this.
  5. Roderick

    Roderick Well-Known Member

    That's a beauty. Enjoy.
     
  6. twhite

    twhite Peeping Tom

    That sucks. Did you need a half a stitch to close the wound. Or rub some salt on it?
     
    AGHisBBS, Rufus T., Hodge and 3 others like this.
  7. Bird Lives

    Bird Lives Future Root Beer King of Turkey

    You know....for wounds like these...although salt is a good idea....I always recommend searing the wound first with a red hot poker from the fire...:shocked003:....then dust with a little salt just to seal things nicely...

    And when you do this besure to take pics or video....and share here with us immediately....
     
    Last edited: Feb 3, 2016
    AGHisBBS, Rufus T., Hodge and 4 others like this.
  8. Bird Lives

    Bird Lives Future Root Beer King of Turkey

    What headache!......I hear this is pretty mild but that Twin blade should liven it up.....Stroke by stroke shave review pls....
     
    AGHisBBS, Rufus T., Karl G and 2 others like this.
  9. Billyfergie

    Billyfergie The Scottish Ninja

    That's a Quite a Rare Canadian Type E 4 you have there with the Ivory Seamed Handle..You don't often see any Type E 4s USA or Canadian made never mind one with a Seamed handle like that..The Type E 4 wasn't made as long as the previous Type E Models..You can identify the Type E 4 by having the lugs removed from the spring like the later G Type..:shocked003:

    Billy..:chores016:
     
    Last edited: Feb 3, 2016
  10. Billyfergie

    Billyfergie The Scottish Ninja

    :signs081:The 2 Grumpy G Types have had a field day with you Karl ..:happy102:

    Billy..:chores016:
     
  11. Karl G

    Karl G Well-Known Member

    Why didn't I think of that? :happy097:
    Yeah, what's that mean when a first time shave with a Rolls leaves you smooth and unharmed but a trusty Schick takes a bite out of you? :eatdrink023:
     
  12. Karl G

    Karl G Well-Known Member

    Super glue and a bulldog clip. :rofl:
     
  13. Roderick

    Roderick Well-Known Member

    I am lucky then. I've got two of them. Thanks for the info Billy
     
    AGHisBBS, Rufus T., wmbjr and 2 others like this.
  14. Redfisher

    Redfisher Doesn't celebrate National Donut Day

    I grabbed this on the bay and should have it soon. This is my favorite type of SE along with the Gbar. It looks cherry in these pics. $ 19.99 shipped.

    image.jpeg image.jpeg
     
    Jayaruh, AGHisBBS, Rufus T. and 6 others like this.
  15. Bird Lives

    Bird Lives Future Root Beer King of Turkey

    $19.99 ......? .....But.....But.......it says, .49 cents......Boy did they see you coming......:rofl:

    All kidding aside....Congratulations......looks positively too cool for school!!!!
     
    Rufus T., Herm2502, Karl G and 4 others like this.
  16. Redfisher

    Redfisher Doesn't celebrate National Donut Day

    Thanks wise guy!!!
     
    AGHisBBS, Rufus T., Karl G and 2 others like this.
  17. Billyfergie

    Billyfergie The Scottish Ninja


    Wise Guy..:git:

    Billy..:chores016:
     
  18. Redfisher

    Redfisher Doesn't celebrate National Donut Day

    If I ever find myself on the other side of the pond we'll have to have a pint or two ya nut!
     
    AGHisBBS, Rufus T., Karl G and 2 others like this.
  19. Billyfergie

    Billyfergie The Scottish Ninja


    :eatdrink047:


    Billy..:chores016:
     
    AGHisBBS, Rufus T. and Karl G like this.
  20. wmbjr

    wmbjr Duck, duck, cooked goose!

    Thanks as always for the advice. Number 1 is definitely my main issue!!! Had to take extraordinary measures to keep from using pressure as I describe in my write up in the next post.
     
Thread Status:
Not open for further replies.

Share This Page