I just did my first re-knots on an Ever Ready 100 and Made Rite 100N, both with Maggards synthetics. Used Gorilla Glue two-part epoxy. http://www.gorillatough.com/gorilla-epoxy Pros Strong hold Water resistant Quick cure time Dries crystal clear Cons Permanent bond Thin consistency; have to let it set-up a bit before applying Would I use Gorilla two-part epoxy again? Yes. The main point, be aware of the consistency of the glue before applying.
I use silicone. What ever brand you get, get 100% silicone. Do not get silicone based caulking compound. The compound is designed to only skin over, and never fully cure where it is not exposed to air. This allows it to move with the walls if needed, but doesn't work well if you shake out a shave brush. I have no issues once I went to 100% silicone, and gave it a day or two to cure.
GE and DAP both make one on a resealable squeeze container, in addition to the big ones for a caulking gun.
I started using hot glue now. Silicone is also good and tight. I am going to use up my current stocks of epoxy and from then on it is hot glue all the way.
Well, that sounds interesting. Have you got much experience with it? It sounds like it would be quick and neat fix, but I wonder how it holds up under real world lathering experiences.
Input my last few knots in with hot glue. Try as I might I cannot pull them out. Sent from my iPhone using Tapatalk
Since you are a Maker of handles, firmly securing knots is a great idea. Don't want them coming out easily. There's a certain expectation of using the unit for years before changing the knot. At the other end of the time line, Restorers of handles may be dealing with vintage and infirm handles that might benefit by using less permanent adhesion methods.
Alright, Steve, I decided to give it a go. I had a brush and knot that I missed setting recently, so I decided to try your hot glue method. It was quick and easy. We shall see how long it lasts. Probably forever.
Well it’s been a while... my wife helped me re-find this thread. After many failed knots with hot glue I switched back to epoxy. Hot glue seems great at first and almost impossible to pull out a knot until it has been in the warm, cold, wet, soapy cycle for a few weeks then the glue just fails. I am back on 100% epoxy now. I can see silicone might be an option for some but I am setting my knots for sale to others and I want them in good and tight.
It is tough for sure but I worry about it - during curing it produces acetic acid - that's the smell you get. I wonder if, long term, this will damage the knot or the handle.