I think 3D razors can be good an inexpensive alternative to the expensive razors now. You will be able to get a great quality shave. It won’t be as nice looking as metal.
You can get a metal look with a plastic that is mixed with metal particulate. They do have filaments already mixed to different ratios of metal to plastic in bronze and stainless steel for example. The plastics they use which I think is standard PLA are also supposed to be denser and have more weight to them. The only drawback as I read up on this is they chew up nozzles quickly but that wouldn't be an issue for you since you should be able turn out a crapload of replacement nozzles for your printer when not if you finally get one.
I looked into having the TNNSER 3D printed in Brass Mix filament. They said it could definitely be done but let me know that it would be more brittle than a regular 3D prin. The metal actually takes away from structural integrity at this point. Still pretty cool and if it wasn't so expensive I would have gone ahead with it.
Status report as of 8/04/20 1. @rawfox1 - done testing 2. @Flintstone65 - done testing 3. @steve207 - done testing @BBS - done retesting 4. @jmudrick - in hand, testing 5. @Karl G 6. @Jayaruh 7. @Terry 8. @Jim99 9. @GAW9576 10. @jgreenepa 11. @Edison Carter
Tom White Tuesday. Playing with exposure in the TBT, Kai blade and one shim, can definitely feel the difference. Not sure the additional exposure is for the better, now had to be careful at that tricky spot at the back of my head. I'll lose the shim tomorrow. I used the Wabbit for a second pass, Chick blade and it was easy to use, reasonably effective. It feels too disposable cart like for my taste. I packed up my scale but the difference in weight between the Wabbit and my Enders, the only injector razor not packed up, is quite substantial. After the pass I took out both the Leaf and the Enders and both were picking up residual stubble I missed with the Wabbit. PS I love the Wabbit design with the magnets!! Sent from my Pixel 2 using Tapatalk
Status report as of 8/11/20 1. @rawfox1 - done testing 2. @Flintstone65 - done testing 3. @steve207 - done testing @BBS - done retesting 4. @jmudrick - done retesting 5. @Karl G - Passed 6. @Jayaruh - awaiting arrival of Wabbit 7. @Terry 8. @Jim99 9. @GAW9576 10. @jgreenepa 11. @Edison Carter
I'm still waiting. The last time it was scanned was on the 11th. It was scheduled to arrive on the 14th, but it did not.
Indeed. Looks like it has landed in Greenville, SC, about 50 miles away. Perhaps it will land here tomorrow afternoon.
I'm still waiting on the Wabbit. The Priority Mail has lost its priority. Hopefully it will arrive tomorrow. That would make 7 days. Status report as of 8/16/20 1. @rawfox1 - done testing 2. @Flintstone65 - done testing 3. @steve207 - done testing 4. @BBS - done retesting 5. @jmudrick - done retesting 6. @Jayaruh - still awaiting arrival of Wabbit @Karl G - Passed earlier, was out of town, still wants in 7. @Terry 8. @Jim99 9. @GAW9576 10. @jgreenepa 11. @Edison Carter
Well this Priority Mail seems to have its priorities mixed up. It was in Greenville at 4:23 AM yesterday, in Hendersonville at 9:03 Pm yesterday, and last seen in Greenville at 12:51 AM today. They have not suggested an estimated delivery date since the last one (Saturday) was not met. This Waskley Wabbit seems to be running here and there.
Yes I have found the exact same thing these past 6 months. 2 of my items have been lost for 3 months now. Disclaimer: This following statement is in no way meant to be political. But what are the people thinking that mass mail in voting will work. I cannot get a few razors sent to the same state I live in. How are they going to handle my vote. Just saying.
Spot on! Just in the last three months, my sister’s birthday card to me never arrived, and a razor I sent out went missing somewhere in Utah. If they can’t handle birthday cards, then they can’t handle something significantly more important.
Yep. Not trusting the mail for voting. On the upside, I used Tom's original TNNSER today, and it looks like I will be using it again tomorrow. In fact, until the Wabbit makes its way to my mailbox, I will continue to use the original TNNSER. It is a fine razor.
It is about rigging elections is why. The scam is very simple since it is next to impossible to clean voter rolls of dead people, people who moved out of state, etc., the political parties have access to that info so it makes it easier to fill out dummy forms for ballots they know will never get delivered then either mail them back or drop them off directly depending who's back pocket the vote counter(s) are in. They can also get infants and underage children on the rolls this way also by using the household information and try to slide those votes past which they couldn't do before. You don't need to bus in the illegals with fake id's or even need illegals or surrogates t0 go in and sign the voter rolls and vote. Less chance to get caught directly. It is a total sham and besides we already have mail in voting it is called the absentee ballot. It is even worse for primaries now, no outside candidate or non favored candidate will ever be able to win a primary since the policital party will control the rigging outright by having a competitive advantage over an candidate without the access to the voter rolls to forge their own votes. My take is if voting changed anything it would be made illegal and anyone who wants to be in charge is reason enough to not vote for them.