The Wabbit 3d printed injector razor pass around.

I think you maybe put the cap on the wrong way in the video - I can see the bottom magnet after assembly.

 

Thanks, I will redo that.

 

OK. I did put the cap on backwards in the original video. I redid the video. This should be right.

 

Unfortunately, when I put the cap back, one of the holes gave up some material. I don't think that is going to hurt its functionality though. I'm looking forward to using it tomorrow.

 

OK, the first shave is in the can. It was a success. You can watch the video if you like. I did two passes with the Schick blade and got a great shave. It is a light razor. I do not like the angle of the head though. It requires lowering the handle so much that it almost interferes with shaving the neck. I would suggest changing the angle of the head so that the handle will come up some more. In fact, I had the brilliant idea that this razor would work great on the TNNSER Enders-like handle.
As you see in the above post, I lost part of the head on one of the holes. I then proceeded to losing the other one. (really sorry about that) I did some experimenting with the stability of the head and decided to continue with the shave. There were no issues other than the long handle and the angle of the head. If the head were angled up about 15 degrees more I think it would be perfect.

 

It is up to @twhite to determine if that is a career ending injury and or if others on the list are skittish about using it now.

 

I am actually checking out a few handles that a guy printed that lives right by me. It is the V-2. I will see if I can get the cap to fit good. These are really I mean really experimental. If I can get a good setup I will get out to @Jayaruh ASAP. I will let you know later tonight.

 

Ok I got a good one together. Purple it is. @Jayaruh i will get it out tomorrow. Hopefully you will have it by Monday. Make sure you get a shave or two in with this one.

 

Just a bit of background on this. There is a member on another forum that lives literally 1 mile from me. He has an Artillery Sidewinder printer. A sub $400 type. It prints amazingly well. Anyhow he asked if he could try printing the Wabbit. I gave him the files and he started printing. He kept having me modify the files until he was able to print with virtually no filling. This is what the Purple one is.

Have fun.

 

Rapid prototyping at its best making sweet shave gear.

 

Thursday's Shave


Cold Water Rinse
Morning TOST
Jayaruh #206 2-band Badger
The Wabbit
Schick
CWR
Aqua Velva 5 in 1 ASB

Shave #2 with The Wabbit. The Morning TOST Shave Soap face-lathered well with my Jayaruh #206 2-band badger brush. Two passes and touch ups with the Wabbit razor with a Schick blade gave me a close, though not as comfortable a shave. I nicked myself on my upper lip. I haven't done that in a long time. I may have been a little cavalier with this shave. After a cold water rinse I finished off with Aqua Velva 5 in 1 ASB. I am clean, smooth, and refreshed...

I will set the Wabbit aside until the Purple Wabbit arrives. I look forward to trying it out. Thanks @twhite.

 

Purple wabbits? Jim, I think the fumes must be getting to you. If you're going to use The Veg, please remember open ventilation!

 

Funniest statement of the week. Even if you are making fun of The Veg!

 

I will have you know the CDC just released an in-depth report on The Veg. It will kill and cure all that ails you.

 

OK, The Veg it is. If I can remember, I will use it with the Purple Wabbit.

 

One Veg makes you larger and one Veg makes you small. And the ones that mother gives you don't do anything at all... go ask JR... when he was just small...

 

Well aren’t you on a roll today.

 

Thank you.

Probably too much coffee in my diet.

 

I am crying right now. Too funny.

 

Purple Wabbit is now in transit to Jim.