The Wabbit 3d printed injector razor pass around.

I think one idea to test since it should be easy to do with 3d printed materials is the tongue and groove system. put the tongue on the handle and groove on the razor head. just make sure the groove opening is on the opposite side of where the blade edge so you don't accidently push the razor head off the handle while shaving. There are potential problems with it though like how will it wear over time.

 

Some pictures of the V3 from my 3D printing guy. Fresh out of the printer.
The material is transparent PLA - not as spectacular as transparent resin, but I had to give it a go.

 

Very very cool. I love the TNNSER handle and look forward to trying this razor.

 

Sorry, I know that I'm late to the party... is there a chance to try this razor?

 

Status report as of 9/24/20

1. @rawfox1 - done testing
2. @Flintstone65 - done testing
3. @steve207 - done testing
4. @BBS - done retesting
5. @jmudrick - done testing
6. @Jayaruh - done testing
@Karl G - done testing
7. @Terry - done testing
8. @Jim99 - on deck
9. @GAW9576
10. @jgreenepa
11. @Edison Carter
12. @cpool222

The pass around list was never closed so anyone can still jump in if they want.

 

Done see the above post.

 

The Wabbit has arrived! It hit the mailbox yesterday, but I have not had an opportunity to use it yet. I’ll give it a go for tomorrow morning’s shave. I’m looking forward to it!

 

Thanks!!

 

My first shave with the wabbit is now in the books!

From the looks of the razor I was expecting an aggressive shave. Not so! I found the wabbit to be on the mild side. Maybe it was the way I positioned it against my face. You hold this one at a different angle than most injectors. Maybe it was the feather light weight of the razor. I’ll focus more on that in my next shave.

So how was my shave? It was a very nice two pass shave that left me with a DFS. I had to touch up around my neck a bit, but I have that issue with most any razor. It was a bit difficult around my nose due to the head size, but I did get all after a couple of nicks.

My first impression of the wabbit is that I like it! It will take another shave or two before I have a solid opinion , but I very much enjoyed using it today. Tom, you did a fantastic job! It’s amazing what you can do with a printer nowadays!

 

Quick update on my end. I may be on vacation when @Jim99 is done with the Wabbit, Or at least by the time it would arrive at my house. We may want to switch me later in the pass around. I'll be gone for most of the 8th of Oct. To the 20th with a shot return home in the middle.

 

@jgreenepa is after you, so we could reverse the order and have him go next. Sounds good to everyone?

 

Sounds good to me.

 

There are only 3 people behind you if you want to go to the back of the line.

 

That works for me. Then I will ship it back to @twhite when I'm done unless instructed otherwise.

 

It goes to @BBS he is running it. So it is his.

 

Status report as of 9/28/20

1. @rawfox1 - done testing
2. @Flintstone65 - done testing
3. @steve207 - done testing
4. @BBS - done retesting
5. @jmudrick - done testing
6. @Jayaruh - done testing
@Karl G - done testing
7. @Terry - done testing
8. @Jim99 - testing
9. @jgreenepa - on deck
10. @Edison Carter
11. @cpool222
12. @GAW9576

note: @GAW9576 requested to be moved to the back of the line.

 

Day two with the wabbit was even better than the first day.

I’m getting used to handling the wabbit and had no issues around my nose at all. It just takes a bit of getting used to handling this razor and it’s all good around the schnoz. I find the angle a little challenging on my neck. It seems I need to hold the handle almost vertical, and I run out of air space between my neck and the razor handle. Not a big deal as I just go XTG and ATG and I’m covered. The light weight of the wabbit does not seem to affect the razor one bit. Two passes and I ended up with a very nice DFS.

Note the I’m using a Chick blade, not the Schick B20s that came with it. Am I missing anything?

 

Nope. I hope the V3 fixes the handle issue.

 

Day three with the wabbit and it was another nice shave!

I believe that the light weight of this razor has no impact on the shave. I can’t prove that, but I can say that the wabbit doesn’t miss a hair in my two pass shaves. The blade is held tightly with the magnet, and I have no concerns of any looseness or movement with the blade. I had to perform a little touch up to get the whiskers around my nose, but that was my only challenge with this razor.

I’m really liking this wabbit!

 

Gosh I'm almost regretting that I'm taking a two-week vacation.