Great way to close out(until next usage)the Imperial soap. This one has to rank among my favorites(up to now). My face and neck feel like a cloud, after shaving with this. About 0:45 at the Loading Dock to get it ready to go. Clean and clear shave all over(including a better job down at Cactus Nation(neck). Zero damage. Nice finish from Clubman Special Reserve(Doc Pinaud Goes West). As Outstanding As It Gets.
Thanks, I have for the most part other than the occasional oops of not going up a dial number or going too high too soon having issues with my blades either feeling dull or cutting myself. I got the style of shaver I am using now for nearly everything just to have these later shaves after a bit be easier like those earlier shaves once the blade has dulled in a hair by going with more open gap/spacing for the blade. Today I may have gone a bit soon on the dial up from 5 to 6 or maybe a bit hard at the very end of shaving with possibly both.
Thanks, I don't go to Badger and Blade much, might have to poke around there a bit. Thanks Gary Superb Joe, getting rid of the gruff look is always satisfying thanks Joe Very classy, nice shave too
16th October 2025. Shaving Recipe for today. Prep: Warm shower:/Cien Men Energize Shower Gel. Pre: Cold wet flannel to my face. Pears Transparent Bar Soap. Brush: Omega 10066 Boar. Face Lather. Bowl: Tesco's Ceramic 'Cosmo' Side Bowl. Lather: Proraso Sensitive Shaving cream. Blade: Dorco Prime Platinum. (D4) Razor: Parker 24C. Post: Cold Water Face & Head Rinse./Cold water face & head wash with brush squeezing's,/Alum Rub./Cold Water Rinse./Homemade (~Autumn/Winter mix~) peppermint lavender, eucalyptus, + Tea Tree essential Oils Mixed Together With Care+ Witch Hazel./Cien Men Aqua ASL./Nivea Men Replenishing PSB. Greetings, Early morning shave, The Proraso Sensitive shaving cream provided me with slick protective lather for the shave leaving a equally good post shave feel. A close comfortable shave to finish my shaving week off wonderfully. Finishing the shave off with a few small dollops of Nivea Men Replenishing PSB. My face is feeling smooth, & smelling divine. Keep safe, and enjoy your day ladies & gentlemen.
16 Oct 2025 TOBS Oud, Semogue Pegasus, Gillette Executive on #5 Exact same lather technique, nice and slick, same prep So I popped in one of my Personna made in the USA blades for comparison with my most recent blades Initial impression of dragging rather nice a clean cutting action, a little better in the 2nd pass perhaps, but it still took more work to get the desired result. Binned. I have place the box of blades at the back of the cabinet, who knows I might come back to these another day I thought I would have to go to 3 passes but I bailed out after 2 passes to be on the safe side Despite that the shave turned out fine Finished off with the Blue Stratos duo Have a great start to your days gents
-Thursday- 1939 no.47 popular rubberset 200 arko col conk good morning gents nice work shave fine arko lather,smooth 2 passer.minor pickups col conk lime to finish awesome have a fine day everyone
Good Throwback shave overall. I forgot that the red Proraso is almost out, as it gave a few shocking squeeze sounds before finally coming out like a cloud.Good thing I have another full can, but I may want to order a coarse-beard wet shave deal soon. I hope I can open up the new can without difficulty. Anyway, clean, clear shave across the board, after recovering from the bad squeezes. No damage anywhere. The matching Proraso A.S. is real nice. Super Duper Outstanding.
Nice choice Gary...I'm glad to see that Doc Conk has an A.S. along with all else. Say, I never knew Gillette had postage stamps(chuck yuk yuk)
Today's shave was a 9.5/10 as I used dial 7 for my entire shave. Today was shave 10 on the bottom, 29 in total with the blade from my Personna 100 pack made in USA I bought in late 2017. I used as always, my H 2 or 1962 Gillette Adjustable slim handle shaver without the case. I shaved after the shower so none of home-made shaving lotion/soap combo from the hotel squeeze lotion bottle for shaving today or water on the face, but I did keep the blade wet as needed until the cut. The blade was still on day 9 smoother because this bottom side got stropped more due to not having the blade all the way into the Twin Stropper during that stropping with the first 10--12 turns of the handle where the blade only spun about every 3 shaves in this period before I took the blade out and put it in all the way. I think if I use my King C Gillette blades that are made in China, I will strop the blade before using the blades with the Twin Stropper device to remove that micro burr left on by the manufacturing process.
Same after a ban of posting when trying to explain the tariffs on the thread Why are Shaving items in USA so Expensive in 2025?, I even eliminated the word after the first warning calling them what the Red Hats did, Import Taxes and dropping the names of who signed what into law because of this might have triggered and then the ban after the second post.
Well after all that talk about the Twin Stropper by @Casey 1988 I decided to look it up Lots of opinions on B&B so I asked ChatGPT Here is what it says: https://chatgpt.com/share/68f21190-f77c-8012-a8fa-c011b4a039f1 Why am I asking? I have a Wardonia razor with some old carbon blades, and wonder if it might be worth a try? Just for fun of course Worth bothering with? I did mod some modern blades for the Wardonia but that is equally fiddly and not really for a daily routine type thing