GemStar Customs and SnailForge Collaboration - Again

Discussion in 'Vendor's Corner' started by gssixgun, Feb 19, 2021.

  1. gssixgun

    gssixgun At this point in time...

    Supporting Vendor
    GemStar Customs and SnailForge Collaboration - Again
    Many of the members here will remember over the years Bruno and I working together across the big pond doing Straight Razor Collaborations..

    Well we decided to do it again this year

    Bruno@SnailForge in Belgium did the Steel (W2 Carbon) work along with the Heat Treat and Temper on these 6 razors. They are now heading across the ocean here to North Idaho

    Once they arrive Gemstar Customs will do final polish, and offer limited customizations to finish up the razors in Horn, Bone, Kirinite / Acrylic or G10 scales.

    The razors are 13/16 -7/8 size final size after honing

    The price will be $350 usd plus shipping for standard builds ie: 2 pins and most shapes


    Once the razors are here in hand I will finalize orders and take a small materials deposit on each one..


    These are cross listed on GemStar and SnailForge FB pages

    They will be FCFS

    Only Two of these are left now if you are interested PM here or email me at gssixgun@gemstarcustoms.com

    The two with the shorter tails are still available

    [​IMG]

    [​IMG]
     
  2. gssixgun

    gssixgun At this point in time...

    Supporting Vendor
    First one is done and heading home

    There are still two blanks still available

    [​IMG]

    [​IMG]

    [​IMG]

    [​IMG]


    7/8
    W2 carbon steel
    G10 Jade Ghost scales @.110”
    Malachite Wedge @ .060” outside
    Nickel Silver pins
    Reversing SS outer washers
    Brass Bearing washer
    Yes it balances to the tang like it should
    Honing Chosera 1-5-10 with an Blue-Green Escher Finish
     
    Hembree, deepsea, Keithmax and 2 others like this.
  3. gssixgun

    gssixgun At this point in time...

    Supporting Vendor
    Second one heading home


    7/8-
    W2 carbon steel
    Honey Horn @.115”
    Turquoise Wedge @ .060” outside
    Nickel Silver pins
    SS outer washers
    Brass Bearing washers
    Honing Chosera 1-5-10 with an Blue-Green Escher Finish

    [​IMG]

    [​IMG]

    [​IMG]


    There is still one Blank left unspoken for
     
    Hembree, deepsea, Keithmax and 2 others like this.
  4. ischiapp

    ischiapp Well-Known Member

    Very very near wedge.
    :p
     
    Hembree likes this.
  5. gssixgun

    gssixgun At this point in time...

    Supporting Vendor
    All six blanks on this run have been spoken for,,,

    However I think Bruno and I might do something together again later this year, these collaborations are fun and they get the creative juice flowing
     
    Hembree, Keithmax and TestDepth like this.
  6. stingraysrock

    stingraysrock PIF'd away his custom title

    All very fine! Thank You for sharing!
     
    Hembree likes this.
  7. gssixgun

    gssixgun At this point in time...

    Supporting Vendor
    and Thank You for looking :)
     
    Hembree likes this.
  8. deepsea

    deepsea Active Member

    Wow! Those Honey Horn scales are Gorgeous!
     
    Hembree and gssixgun like this.
  9. Hembree

    Hembree Not as pretty smelling




    Gorgeous....just gorgeous!
     
    gssixgun likes this.

Share This Page