Need restoration advice

Discussion in 'Special Projects' started by Sara-s, May 9, 2022.

  1. Ron R

    Ron R Well-Known Member

    I have used stove top glass cleaner with excellent results on brass razors, it has just the right amount of fine abrasive and seems to lift the dirt and staining all you need is one of the green pot or tooth brush for scouring sponges with abrasive and sponge. I suggest wearing gloves when using any compounds for cleaning because if it will clean brass oxides it will over clean the skin IMO.
    You could test a small area on the inside or bottom of vessel to make sure, if it does not brighten up the corrosion on the inside it is just brass coating I'm thinking.
    cleaner (2).jpg
    Last edited: May 31, 2022
  2. Sara-s

    Sara-s This Pun for Hire

    It did indeed happen. See?
    Ijustmissedthe50s, Ron R and richgem like this.
  3. richgem

    richgem suffering from chronic clicker hand cramps

    Nice work!

    Clearly it did not not happen. ;)
    Sara-s likes this.
  4. swarden43

    swarden43 "It's your shave. Enjoy it your way."©

    Sara-s likes this.
  5. wheatshocker

    wheatshocker Active Member

    What kind of 'bit' did you use in the Dremel tool to apply the polishing compound? I assume a felt or some type of fabric.
    Ijustmissedthe50s likes this.
  6. Sara-s

    Sara-s This Pun for Hire

    Yes, the felt bit.
    Ijustmissedthe50s likes this.

Share This Page