1. H.Boker & Co.
    "TREE"
    Germany

    PB251355.JPG

    PB251356.JPG
    RezDog, Drygulch, AGHisBBS and 8 others like this.
  2. Dubl Duck Special #1
    Bresnick New York
    Solingen Germany

    PB251360.JPG

    PB251361.JPG
    Dansco, RezDog, Drygulch and 8 others like this.
  3. AGHisBBS, Karl G, DaltonGang and 4 others like this.
  4. [​IMG]
    :rofl:

    Billy..:chores016:
  5. Well you sure can’t with the edge it had. They took 100 years off the freaking edge.


    Sent from my iPhone using Tapatalk Pro
  6. Yeah, but now you wont need as much tape, for a good bevel angle. Glass half full. :rofl:
    Karl G, Billyfergie, Keithmax and 2 others like this.
  7. I enjoy the shave that the ERN 929 provides. Good size and nice jimping - maneuverable.

    Nice purchase!
    B71D1847-A459-443F-80D1-395E139E1DDD.jpeg
    Dansco, RezDog, Karl G and 8 others like this.
  8. [​IMG]
    Och Aye the Noo Tom..I Forgot..You have a Welsh Yellow Lake Branded Stone..Well..I Can Only Talk of My Stones Again But..The Yellow Lake After My Coticule is Some Combo Finisher..Taking them Off the Yellow Lake at around the 16 K Mark Zips Up the Coticule Edge Whilst Retaining the Butter Smoothness of the Coticule..:)

    For Me its a MIRACULOUS Shaving Edge..Touched by a Fair Maidens Hand..I Kid Ya Not..:happy102:

    Billy..:chores016:
    Karl G, Keithmax, AGHisBBS and 6 others like this.

  9. Thanks. It set me back a whole $13.77. There weren't many pics of the razor, when I bid on it.
    Karl G, Billyfergie, Spyder and 3 others like this.
  10. Karl G, TestDepth, M14Shooter and 2 others like this.
  11. [​IMG]
    [​IMG]
    [​IMG]
    My Silicone Carbide Arrived Today..I Lapped My Recently Acquired Dark Blue Thuri with 80 Grit & 220 Grit Silicone Carbide..I then Lapped it with 350 Grit to 1000 Grit Wet n Dry..The 80 Grit Silicone Carbide Made Short Work of Taking the Chips Out of this Stone & the 220 Grit Silicone Carbide Took the Scratches Out in Jig Time..:)

    This Stone is Not the Hardest But Not the Softest Either..Took Me around 20 Minitues from Start to Finish & its as Cheap as Chips & a Wee Bag will Probably Last a Lifetime..Canny Whack it..This Stone is Uber Flat & Uber Smooth..Superb Stuff..:happy088:

    Billy..:chores016:
    SevenEighth, Dansco, Keithmax and 9 others like this.
  12. Excellent. :happy036:
  13. Great Stuff that Silicone Carbide Scott..That 80 Grit is Like Man..A Fast Cutter..Real Gritty..The 220 Grit Took Out the Scratching s from the 80 Grit in No Time..I Am Blown Away with this Stuff..A Doddle to Use an All..:happy088:

    Billy..:chores016:
    Keithmax, DaltonGang, Karl G and 2 others like this.
  14. Yeah Ive been using the silicone carbide powder, its very quick and easy to lap any stone, a bit messy but better than sand paper for me.

  15. Aye its Messy..I Done the Work Over the Bath Tub..It was Like a Miners Coal Pit..Washed Away No Probs Mind..:happy088:

    Billy..:chores016:
  16. Dubl Duck Satinedge just arrived today. I couldn't pass on this one. I threw out a low bid, and won. $15.50. It just needed a little polish.

    PC021380.JPG
    M14Shooter, Dansco, Jayaruh and 11 others like this.
  17. Schweet!!
    Billyfergie, DaltonGang and Karl G like this.
  18. Stole that one. Nice!
  19. These 2 are on my bench. The Birmingham shave works is a real beauty just needed a little polish and honing. The Hibbert and Spenser had broken scales but I had another set so a good clean and repin she should be good to go.

    IMG_38.jpg
    Dansco, Jayaruh, RezDog and 8 others like this.
  20. Nice score! I’m really partial with scales sporting bolsters :love055:
    Billyfergie, Keithmax and Redfisher like this.