3D printed razors

Discussion in 'Safety Razors' started by BBS, Dec 5, 2020.

  1. BBS

    BBS Well-Known Member

    Here are some publicly available designs for non commercial use. You'll have to find someone to or print them yourself.
    Licensing terms are at the links.

    Designs by @twhite published by @riverrun

    TNNSER Gem style SE
    https://www.thingiverse.com/thing:3875898

    Wabbit V2 and V3 injector style SE
    https://www.thingiverse.com/thing:4617579

    Designs by @riverrun

    Caerbannog capless injector style SE
    https://www.thingiverse.com/thing:4648573

    Designs by a gentleman named Roger Quintero who I don't think is a member here

    Gem style SE
    https://www.thingiverse.com/thing:4667202

    triceratops Gem style SE
    https://www.thingiverse.com/thing:4653854

    adjustable gem style SE
    https://www.thingiverse.com/thing:4669389

    AC injector style SE
    https://www.thingiverse.com/thing:4646886

    DE safety razor with multiple aggression level caps
    https://www.thingiverse.com/thing:4669226

    Designs by a gentleman named Ivaylo Mitev who I don't think is a member here

    adjustable DE razor
    https://www.thingiverse.com/thing:3980835
     
  2. BBS

    BBS Well-Known Member

    This is only a small section of some of the designs available, if you know of other ones or want to share your own please add to the thread.
     
  3. jimjo1031

    jimjo1031 never bloomed myself

    I just noticed the adjustable razor on Facebook, looks interesting.

    129730819_10221824741079259_2802290994477386449_o.jpg
     
    Last edited: Dec 5, 2020
  4. riverrun

    riverrun Well-Known Member

    To clarify:
    TNNSER 3D, Wabbit V3, Caerbannog: Heads all by @twhite, Handles by me
    Wabbit V2: Head and handle by Tom.
     
  5. ischiapp

    ischiapp Well-Known Member

  6. Jayaruh

    Jayaruh The Cackalacky House Pet

    Supporting Vendor
    My Triceratops arrived yesterday, held up in the USPS about a week. So, I was chomping at the bits to try it out, and Saturday was my straights day. No worry. I used it on the second pass and clean ups. It was great. I will put it into full use next week starting Monday.
    sos201212.JPG
    IMG_3280.JPG IMG_3281.JPG IMG_3282.JPG
     
  7. BBS

    BBS Well-Known Member

    Ron R, SlimGem, Dave in KY and 2 others like this.
  8. BBS

    BBS Well-Known Member

  9. Jayaruh

    Jayaruh The Cackalacky House Pet

    Supporting Vendor
    A shaver on Facebook asked if the Triceratops will take an injector blade. I initially said no, but later decided to check and see. I believe it will take an injector. I will try it out later this week, but tomorrow I will use it with a SE blade.
    I have a dulled injector blade I use as a shim for my wedge stropper. I used it to test the Triceratops.

    IMG_3298.JPG

    It looks like it will work to me. I will try it out on Tuesday. Stay tuned.

    IMG_3299.JPG
     
  10. twhite

    twhite Peeping Tom

    Loving all the 3D razor designs. Mind you not all will be to your liking. I am confident you can find some.

    Please if you have a design make it available to the public. This to me is the way forward to affordable razors to the masses. If you are looking to capitalize on the shaving people that is absolutely fine. Sell your idea. I made my razors for the challenge for myself. I am happy to share. The point is that this is the new frontier. I say let’s jump on this Bronco and give it a spin.

    Resurrecting old ideas or new ideas. Let them fly.

    Feel free to try.
     
  11. Jayaruh

    Jayaruh The Cackalacky House Pet

    Supporting Vendor
    I had my first full shave with the Triceratops, and it could not have gone better. This is a very nice little razor. I will try it tomorrow with an injector blade.
    sos201214.JPG
     
    Dave in KY, SlimGem, Electrif and 2 others like this.
  12. ischiapp

    ischiapp Well-Known Member

  13. ischiapp

    ischiapp Well-Known Member

    Dave in KY, SlimGem, Droo78 and 2 others like this.
  14. BBS

    BBS Well-Known Member

    Another 3D printer service to consider. They also do metal 3D printing if that is your thing. Keep in mind 3D printed metal will cost considerly more than 3D printed plastic.
    https://www.shapeways.com/
     
    SlimGem and cliffb599 like this.
  15. SlimGem

    SlimGem Well-Known Member

    I couldn't agree with you more.
     
  16. BBS

    BBS Well-Known Member

    You and Tom should have a meeting of the minds concerning razor design and 3D printing.
     
  17. Leo K.

    Leo K. Well-Known Member

    These 3D printed razors are fascinating and interesting. I think the Triceratops is my favorite as well as the Wabbitt.
     
    Dave in KY and SlimGem like this.
  18. SlimGem

    SlimGem Well-Known Member

    Here's another 3d printed GEM SE style safety razor. It has the same blade holding method as the EndGem Speed, but with a low profile head and round handle. I've uploaded the files on Thingiverse.
    https://www.thingiverse.com/thing:4715320

    20210108_113922.jpg
    20210108_114111.jpg
    20210108_114156.jpg
     
    Dave in KY, Electrif, Droo78 and 3 others like this.
  19. BBS

    BBS Well-Known Member

    Potential new 3d printed design I am working on with @twhite
    It is based on the Razorock Hawk V3 open comb but with some geometry tweaks for a schick injector blade. The machining is @twhite handiwork.

    Prototype
    injector1.jpg injector2.jpg

    If it works to satisfaction 3d printed files will be made available for the razor head and 2 versions, one for SLM 3D metal printed aluminum and one for 3D printed plastics.
     
    Last edited: Jan 19, 2021
  20. Jayaruh

    Jayaruh The Cackalacky House Pet

    Supporting Vendor
    I am shaving with 3d printed razors this week. Today, I started off with the TNNSER by @twhite. I love the way this razor shaves. I always get easy, smooth, efficient shaves. Love it.
    Tuesday - Triceratops
    Wednesday - EndGem Speed
    Thursday - GEM-LP (low profile)
    Friday - GEM green resin
    It looks like a fun week.
    Saturday - Straights of course
    Sunday - Lather catcher
     
    Dave in KY, Electrif, Droo78 and 4 others like this.

Share This Page