The Eis a bake-a-lite handle, usually honey colored. The G is a plastic handle, with a seam if you look closely
Eversharp Type G Identification ... The Type G can be easily identified by the numbers on the left side of the spring....The G Type has two patent numbers...1806087 and 1969945...The Type E has a single patent number..1806087 & Other Pending..The Canadian Type E has got the same patent number as the USA Type E but has made in Canada 1937..Its Not the Colour of the Handle Per Se but these Numbers that Matter..Also see this Thread of Mine for more Intel.. http://www.google.co.uk/url?sa=t&rc...J7448RvjmSMS-qzSA&sig2=fCazjPARQAGI5S2eze_YMg Billy..
Your honor, I rest my case! Take your time...your head will explode if you try to take it all in too quickly! Rome wasnt built in a day ya know!
Just kick back....pour your favorite beverage....and enjoy a good read.....This Injector & SE Party Thread is an education! But YOU young man! Thats right....You know who you are (@Rufus T. )...You have also made it a point to follow up with practical, hands on razor and razor on face time....Thats priceless! But I wouldn't tell anybody that you don't have a Damaskeene.....You need to straighten Up your Act Mister!!! ................(there.......is that enabling enough?)
@twhite could you explain the cut down feather blade. How to cut and load and everything else I need to know I'd like to give it a shot and don't have a clue where to start or what I need to do to make one and shave with it. Thanks Ken P
Take Feather Pro Blade from its Magazine Put a Standard Blade for size on Top Cut the Pro Blade with a Sharp New Pair of Scissors on the Cutting Edge Slip the Cut down blade into a Standard Magazine Inject as Normal Some Tips.. Cut the End of the Blade that's Going into the Razor..It will Slip into the Standard Magazine Easier Use Brand New Serrated Edge Scissors If you Don't get a Clean Cut..Dress it off with a Womans Nail File.. The Hussy Club Members will have Plenty of Woman's Nail Files.. Billy..
Thanks @Billyfergie I might have to try that I just purchased my second injector yesterday a G1. Need to clean it up and try it out thanks . Ken P
Folks that Enjoy an Awesome Sharp Blade like it..It will be Too Much Blade for Some Folks..The G Type isnt a Mild Razor..It Transforms a G Type for Sure..Its Pumped Up on Steroids.. Billy..
Okay, thanks to all you enablers out there, I'm going to be in trouble again. I just bought a Schick Eversharp G type injector on eBay for $5.00 plus shipping. It's not mint, but it looked decent enough in the pictures. I also purchased 2 packs of injector blades. I'm in for $21 in total, so not too bad to explain to the wife. Hmm... I'll see if it lives up to the hype before I go further down the rabbit hole!
It's gonna clean up beautifully Jim, I used scrubbing bubbles on mine. I think you'll be pleased with it!
Scrubbing bubbles works well on cleaning these razors up. Just get the kind with out bleach. Also don't leave it on much more than a minute or so, as I understand it can attack the finish if left for too long. I hold the razor right up to the nozzle and get the foam under the blade spring to get the area underneath cleaned out too. Then I rinse thoroughly in hot water. If there's no blade in the razor, hold it upside down and carefully watch as you inject a new blade. If it drags over the blade stops, you'll have to inject a new blade before your inaugural shave. Also don't try to force the curved spring open on a G-Type, that's bad.
Be very careful if you use hot water for cleaning, it can melt/deform the handle. Sent from my iPhone using Tapatalk
That looks like a real peach Jim...Nice find. Should clean up nice. And don't worry about falling down the rabbit hole...at the bottom there is a soft cushion of other guys who fell before you to break your fall.
